If you’ve had some trouble installing the drivers from Hantek for windows 10, there’s a few issues that need to be resolved. hey, recently i’m searching for replacement software for the hantek be and i found openhantek, but everytime its always say connection. While OpenBE is a windows-only software for BE was OpenHantek originally developed for the Hantek 2xxx and 5xxx models under Linux (
 
 

 

Hantek 6022be driver windows 10. How to install Hantek Drivers on Windows 10

 

Also try to plug the device in a different USB port and make sure that both connectors of the USB cable black and red are plugged. Regarding the button at the back, it is simple: keep it pressed H position to use the oscilloscope with Hantek’s USB driver and software.

With the button in the position P unpressed the device will use the fx2 usb driver, this way you can use the Saleae Logic software for the logic analyzer limited to only 8ch but way better and much more useful than the original software. You need to unplug and plug the device againto the usb port every time you press the button for it to work.

And refer to this post to update the driver for windows Error status 0x” I’m going to return it. Han Publish time Sir,please wait,Hantek will try to solve your problem Robert Publish time Edited by Robert at any driver which I downloads will not sucesse to update the driver foe Win Please advise how do it? If you can, please connact a adapter 5V 2A to the red connector of the usb cable.

Second, connect the scope to your computer via the USB cable. Pay attention to the sequence of operations. You must be logged in to post a comment. Skip to content. All Posts. August 27, February 11, Jake 0 Comments. You May Also Like.

What are Micro-switches and what makes them so great? February 23, February 23, Khang 0. Breadboarding Basics April 14, June 20, George 0.